Through the wall reversing camera

This little camera is quite pricey at £56 but it is claimed to be Sony CCD
Comes complete with a 28mm hole saw and is primarily made for bumpers so comes with a couple of angle tubular collars to adjust the angle.
[You must be registered and logged in to see this image.]
Mine is going through the flat & vertically plumb rear wall so I discarded the spacers and to my delight realised it is now long enough to go right through the full 29mm thickness and still get the securing ring on.
[You must be registered and logged in to see this image.]
I kept the piece of wall that I cut out for the external 230 volt socket as I knew it would be handy at some time even if only for dimensions or just to show people how the wall are constructed (Rapido)
The hole was straight forward making sure it goes through at 90 degrees! 
[You must be registered and logged in to see this image.]
The camera has it's own O ring so no sealant needed.
[You must be registered and logged in to see this image.]

A picture speaks a thousand words Andy, a great post for those contemplating a new camera.
Cal

More to come about this but it's on my other pooter.

Look forward to reading it, not in the market myself at the moment but always good to know what's out there in case.
Cal

Brill technical details - as usual -   

Here is the next phase

Having carefully measured the centre line I used the 28mm hole cutter supplied with the camera which makes a clean job in the GRP
[You must be registered and logged in to see this image.]
Internal cable protection
[You must be registered and logged in to see this image.]
view with bike rack folded down
[You must be registered and logged in to see this image.]